Logo Utrecht University

Handleidingen

Back
Target audience: Staff

U and O drive on iPhone/iPad (VPN)*

This manual describes how you can open the files on your Utrecht University network drives using an iPad or iPhone.

There are two applications (apps) you will need to do this:

  • Cisco Anyconnect (free);
  • FileBrowserGO (free). There are some alternative apps available, but due to its functionality this application has been selected.

Note: If you are connected with the eduroam network at Utrecht University, you will not need the app “Cisco Anyconnect”. If you also want to access your files at home, then you do need both apps.

* The screenshots in this manual are partially in Dutch. 

  • Step 1

    Open the Appstore. From the Apple Appstore download “Cisco AnyConnect”.

    (This app is free).

  • Step 2

    After it has been installed open  Cisco AnyConnect.

    Click “OK”.

  • Step 3

    On the left select “Connections” and then on the right “Add VPN Connection…”

  • Step 4

    For “Server Address” enter: solisvpn.uu.nl

    The “Description” is optional; here you can give your own description for the connection. If you do not change it this will be automatically filled in with “solisvpon.uu.nl”.

    Click “Save” in the top right to save these settings.

  • Step 5

    Enable AnyConnect VPN by moving the slider in the top left to the “on” position. A popup will appear asking you for further details (see screenshot).

    For “Username” enter your Solis-id .

    Also enter your Solis-password and click “Connect” in the top right corner.

  • Step 6

    If the status changes to “Connected” (and the VPN-logo is displayed at the top), then the secure connection has been established. Close the app by clicking Home-button. (The connection will not be terminated).

    Should you wish to terminate the connection later you can restart AnyConnect and move the slider behind “AnyConnect VPN” back to the “Off” position.

  • In the next steps we will install the second application, which allows the access to your files. If you are connected with eduroam at Utrecht University you can start here.

  • Step 7

    To access the files on your U and O drives you need another application.

    From the Appstore download the application “FileBrowserGO”.

    This app is free and has some advertisements.

  • Step 8

    After it has been installed open FileBrowserGO.

    Click the “+”  at the top to add a new connection.

  • Step 9

    You will see this notification.

    You can skip this by pressing the cross in the top right corner.

  • Step 10

    Select “Computer/Drive” and then “PC”.

  • Step 11

    Press “Manual Setup” (“Handmatig Instellen”).

    Then press “PC” again and you will see a menu opening.

  • Step 12

    For the connection enter the following details:

    Address: \\soliscom.uu.nl\uu\users\Solis-id (replace “Solis-id” with your own Solis-id)

    Username: soliscom\Solis-id (for example: soliscom\goedh003)

    Password: your Solis password

    Display name: U-drive

  • Step 13

    Next click the arrow after “Advanced Settings”.

    Enable the following two options:

    – Allow netBIOS
    – SMB Pipelining

    Click “Save” in the top right corner.

  • Step 14

    If you also want to connect your O-drive repeat steps 8 till 11, but use the following details for  step 10:

    Address: \\soliscom.uu.nl\uu\data

    Username: soliscom\Solis-id (for example: soliscom\goedh003)

    Password: your Solis password

    Display Name: O-drive

  • Step 15

    Save these settings by clicking “Save” in the top right corner and then clicking “Done” in the top left corner.

    On the left you will now find links to your O and U drives. If you click them you can browse your files.

    Note: you always need to connect via Cisco AnyConnect before you browsing your files if you are not connected with eduroam at Utrecht University.

     

  • Step 16

    For all future use:

    – Start/unlock your iPad/iPhone;

    • Are you connected to eduroam? Start FileBrowserGO and select your O or U drive.
    • Are you connected to a different WiFi network (for example at home)? First start AnyConnect and enable your connection. Then start FileBrowser and open your files.

    When you are finished always terminate your VPN-connection. You can do so by moving the slider to the “Off” position (see screenshot).

Last modified: 6/09/2019

Back
Feedback
Was this manual helpful? Please help us improve our manuals by providing feedback!
Sending